Capacitor Cell Construction Features
Toll Free  :  800.245.0583
Fax  :  586.979.9484
 

HomeAboutProductsServicesResourcesNewsContact Us




Services > Replacement Parts > PFC Capacitor Cells > Construction Features

POWER FACTOR CORRECTION CAPACITOR CELLS

CONSTRUCTION FEATURES
  • Termination - Cell terminal posts are either 1/4-20 or 12-24 NC-2A threaded depending on the application to ensure superior contact through compression.

  • Cell Housing - Constructed from a plated steel, the cell is hermetically sealed to prevent contamination.

  • Dielectric / Electrode - Constructed of metallized polypropylene film, a self healing, low loss material. Results in low operating temperature and minimal loss of capacitance over the life of the cell.

  • Three-Phase Construction - Internally connected in a three-phase delta connection to ensure three-phase operation under all conditions and minimize external wiring.

  • Three-Phase Pressure Interrupters - UL Recognized device (10,000 amps fault current) to disconnect all three phases if fault occurs thus preventing single phase operation.

 

Termination Configuration

MYRON ZUCKER INC. products are designed to:

  • Improve power factor
  • Eliminate utility penalties or surcharges
  • Increase available distribution capacity
  • Mitigate harmonic distortion
  • Protect sensitive equipment
  • Decrease downtime
  • Reduce line losses and associated cost
  • Comply with industry standards

CONTACT US

Myron Zucker, Inc.
36825 Metro Court
Sterling Heights, MI 48312
Toll Free: 800.245.0583
Phone: 586.979.9955
Fax: 586.979.9484
Email: info@myronzucker.com