MODEL SELECTION

Table 1 offers a wide array of standard capacitor cells for most Power Factor Correction applications.

Table 2 should be used to select capacitors for applications requiring "hardened" cells where harmonics are expected. Using these capacitors assures maximum life.

Notes:

1. All capacitor cells are shown as 3 phase units.
2. These capacitors use a dry type thermoplastic medium.
3. CUSTOMER must provide over-current protection as required by code.
4. All units are supplied un-painted.
5. Case material is plated steel approximately 0.017 inches thick.
6. Discharge resistors are included with all capacitor cells.
7. Consult factory for height dimensions.